All products

BBQ grill Knob made of zinc alloy

Replacement repair push button switch cap for AA battery igniter (cap for AA igniter push button type)

Perfect Replacement for Outdoor Patio Heaters: Specifically designed to replace faulty thermocouplers in most propane-powered outdoor patio heaters (NOT universal—check compatibility first). Features a total length of 13.7" (350mm), 4.8mm flat terminal for dump switch connection, and M8*1 nut for secure valve attachment, making it ideal for heater repair.

/2" OD x 3/8" ID 24 '' stainless steel flexible pipe for fire pit CSA approved，Please pay attention to the length of the bellows and the size of the copper joints at both ends. The two copper joints we match are different. The joints at both ends of the bellows are 3/8 in size, which is consistent with the picture.

End Nuts for gas valve 8mm, Two Flat square terminals width 4.8 mm for tilt switch

Thermocouple end M8x1

Low pressure QCC1 connection propane regulator with hose 5Ft 1pc

60000 BTU catering gas safety valve 1pc

Can be used on a variety of appliances

Connect two compatible propane appliances from one RV propane outlet with this 250 type Y splitter kit. The standard 1/4 inch quick connect design helps simplify camping grill, heater, stove, and propane hose setups.

Replacement split thermocouple wire assembly for compatible gas fryers and cooktops that require pilot flame sensing and gas valve control. The 1.25m copper assembly includes 6.3mm flat terminals and an M9x1 end nut for matching appliance connections.

Connect up to three propane appliances to one compatible propane tank with this Meter Star 3-way splitter. The solid brass QCC1 Type 1 adapter fits RV and home propane setups using POL and Acme threaded applications.

This Meter Star 2-piece propane pigtail hose connector set is designed for RV, trailer, and camper LP gas tank replacement or setup. Each 12 in connector features a 1/4 in inverted male flare connection, 350 PSIG working pressure, and 200,000 BTU per hour flow rating.

Battery-powered 1.5V pulse igniter for compatible LPG and natural gas stoves, ovens, grills, heaters and similar gas appliances. Includes two 400mm ceramic-insulated spark wires, supports a 2-4mm discharge gap, and runs on a standard AA battery.

Replace worn or failed ignition parts on compatible propane and natural gas grills, ranges, heaters, and similar gas appliances. This set includes two push button piezo igniter kits with threaded ceramic electrodes and 11.8 inch spark plug wires for flexible DIY installation.

Control natural gas or liquid propane flow for fire pits, patio heaters and compatible gas appliances with this straight quarter-turn shut-off valve kit. It includes 1/2 inch female NPT inlet and outlet threads, a brass valve body, chrome-plated flange and two 3/8 inch male flare to 1/2 inch NPT adapters.

This 2-piece Meter Star anti-tilt switch set is made for electric fan heaters and compatible electric appliances that use a tip-over power cutoff circuit. The 16A two-terminal micro dump switch is suitable for replacement, maintenance, or safety circuit integration when the original specifications match.

Expand a single propane source to connect up to three compatible appliances with this Meter Star 250 Type 3-way splitter. The 1/4 inch plug and quick-connect outlets support North America standard quick-release propane connections for RVs, grills, patios, and outdoor cooking setups.

Replace a worn or broken microwave turntable rotor core with this Meter Star Y-type bracket base set. Made from PP material, it helps restore smooth turntable rotation and supports more even heating in many microwave ovens.

Replace a worn or unreliable gas appliance igniter with this Meter Star push button piezo ignition kit for propane and natural gas applications. The 2-piece set includes 11.8 inch cables and M10×1 threaded electrodes for grills, ranges, heaters, and stoves where the size and grounding requirements match.

Replace worn ignition parts in compatible gas heaters, burners, and gas appliances with a push-button piezo igniter designed for LPG and natural gas use. The battery-free design generates a high-voltage spark per press and includes 2 pieces for repair, maintenance, or keeping a spare on hand.

Meter Star K-type thermocouple sensor provides temperature feedback for compatible furnaces, ovens, boilers, HVAC equipment, kilns and process heating systems. The M6 screw probe supports secure installation in matching ports, while the 6.5ft shielded cable allows flexible placement away from heat sources.

Meter Star K-type M6 screw thermocouple sensor provides stable fixed mounting for industrial equipment, ovens, engines, and temperature control systems. The 1 m WRNT shielding wire helps reduce electrical interference and withstand physical stress during high-temperature monitoring.

Meter Star K-type thermocouple sensor provides high-temperature measurement for compatible furnaces, ovens, boilers, HVAC systems and industrial equipment. The M6 screw-in probe supports secure installation, and the 16.4 ft shielded cable helps with routing in larger or hard-to-reach setups.