Meter Star Set of 2 Universal Ceramic Electrode Ignition Spark Plug Wire 0.3 Meter Electronic Device,Suitable for Push Button Piezo Igniter

Highlights - Wire length: 30cm,Detailed parameters refer to the sample size in the photo，Note that the interface of the ignition needle is round - Electrode : M10*1 length: 51mm;Length of wire 1.18 inch with high tempereture 200°C resistance for Piezo Igniter Only - Pin straight length: 19.5mm,135degree at head 9.0mm,Set of 2 - If you can't use it normally after installation, please check whether the wire connection is normal; 2. Adjust the distance and position of the ignition needle and the burner, you can also contact us, thank you. - Please note that the connection to the igniter is circular, suitable for pressing the igniter;The end of the terminal is in round with 2.3mm insert, If yours is square, try to stamp it and connect your current igniter to get a signal 1.If you can't use it normally after installation, please check whether the wire connection is normal;
2. Adjust the distance and position of the ignition needle and the burner, you can also contact us, thank you.
Please note that the connection to the igniter is circular, suitable for pressing the igniter
Length of wire 1.18 inch with high tempereture 200°C resistance for Piezo Igniter Only
Universal spark with M10*1 thread includes two nuts to fix on your plate
Suitable for repari your gas stove, grill, heater or other gas appliance for spark
The end of the terminal is in round with 2.3mm insert, If yours is square, try to stamp it and connect your current igniter to get a signal
Pack of 2 for a spare part