Meter Star Propane Tank Top Heater Replacement Parts Safety Faston Type Thermocouple Safety Assembly Kit with FD4 Dump Switch

Highlights - Thermocoupler length 20inches with one FD4 weak current tilt dump switch gas R≤10 mΩ - Thermocoupler set includes two parts with white faston type terminal connect with tank top propane heater valve - The round ring terminal should be connect with the valve screw or any metal part - Special Design for Gas heaters Outdoor heaters Gold plated connectors inside - Approved safety thermocouple replacement parts for propane tank top heater. (Not suitable for Texsport heater or similar main control valve) Propane Tank Top Heater Replacement Parts Safety Faston Type Thermocouple Safety Assembly Kit with FD4 Dump Switch Is a Repair Replacement Part for Most Tank Top Propane Heater like Mr Heater, Dura Heat, COSTWAY, REMINGTON,ProCom etc
Fits prpane tank top heater for most brand like Mr Heater, Dura Heat, COSTWAY, REMINGTON,ProCom and other most tank top heater with white faston female plug of valve Thermocouple is a replacement sensor for heaters the head need to be heated always
Operation Instructions
1). install the thermocouple on a pilot bracket or heater mounting plate fixed by clips
2). Keep the tip at around 5mm distance from the burner hole in right height.
3). Faston the thermocouple end on the dump switch and gas valve end tightly
4). Connect two flat terminals well with the current tilt switch terminals.
5). Open gas and push your valve around 5-10s till the thermocouple head is heated enough.
6). Release your hand and it work properly
If when you release hand, gas valve shut off again, Please check
a. If your thermocouple is always be heated on flame
b. If the thermocouple end is well connect with valve
c. If the terminals connect tilt switch well.