Gas Hoses, Fittings & Seals

Connect supported gas appliances with a 5-piece hook-up kit that includes a 22-inch flexible stainless steel gas connector, 1/2-inch brass ball valve, three conversion couplings, and PTFE thread sealing tape. Designed for garage heaters, gas stoves, wall-mounted heaters, gas fireplaces, and gas logs when the appliance connection requirements match.

Connect or extend compatible gas and fluid lines with this 2-pack of Meter Star brass adapter unions. Each coupler has 3/8" male flare threads, 5/8"-18 UNF, on both ends for propane, natural gas, refrigeration, AC, hydraulic and fluid line applications.

Meter Star brass adapter unions feature 1/2" male flare threads on both ends for secure gas, fluid, HVAC and refrigeration line connections. This 2-pack supports extension and repair work for propane, natural gas, LPG, air conditioning and hydraulic systems.

Connect two compatible low-pressure propane or natural gas hoses from one supply line with this 3/8 inch quick connect Y-splitter adapter. Solid brass construction, a rubber cap, automatic shutoff, and CSA certification make it suitable for grills, patio heaters, pizza ovens, fire pits, generators, RV setups, and outdoor cooking areas.

Connect standard 20-40 lb LP propane tanks to a compatible two-stage regulator with this 2-piece 15 inch RV propane hose set. Stainless steel braided hoses, solid brass fittings, 350 PSI max rating, and 200,000 BTU/Hr gas flow support RV, camper, grill, stove, and outdoor cooking fuel setups.

Convert a standard 3/8 inch female flare propane hose connection to a 1/4 inch quick-connect plug setup. This solid brass adapter supports easier hook-up for RV gas supply lines, portable grills, heaters, and propane extension hoses.

Meter Star brass union adapters connect 3/8 in male flare with 5/8-18UNF threads to 3/8 in male NPT fittings for gas and fluid line applications. The half-union design helps simplify assembly and disassembly for propane BBQ grills, heaters, fireplaces, RV trailers, and low to medium pressure systems.

1/4 inch OD aluminum gas tubing kit for repair and replacement in compatible water heaters, furnace heaters, valves, and pilot burner assemblies. Includes M10x1 male and female compression olive fittings and a 39.5 inch tube for routing in gas appliance service spaces.

Connect compatible gas stoves, hobs, grills and other gas appliances with this 2-piece brass adapter set. The 1/2 in right-hand female flare to 1/4 in left-hand male thread design supports common home, patio, camping and caravan gas connection setups.

Route propane, gas, water or oil lines in tight installation spaces with this 90-degree brass elbow adapter. The 1/2" Female NPT to 3/8" Male Flare fitting is suited for compatible fire pit burner systems, BBQ grill setups and portable heater connections.

Make a clean right-angle gas connection for fire pits, BBQ grills, patio heaters, portable heaters and RV systems. This solid brass 90-degree elbow fitting features a 3/8 in female swivel flare and 3/8 in male flare to help align tight installations without twisting the hose.

Connect compatible outdoor gas appliances with a 10.5 ft natural gas hose kit designed for flexible placement around patios and outdoor kitchens. The 1/2 in quick disconnect and swivel flare nut support fast connection, easier alignment, and reduced hose twisting during installation.

This 90-degree brass gas elbow fitting connects regulators, gas hoses, and heating components with 1/4 inch left-hand male and female threads. Its compact angled design helps improve hose routing in tight spaces such as caravan gas lockers, mobile homes, catering equipment, and compact heating systems.

Adapt a 1/4 in Female NPT connection to a 1/4 in Inverted Male Flare connection with 7/16 in-24 UNEF thread for RV propane pigtail hose setups. This pack of 2 solid brass adapters helps resolve fitting mismatches without replacing the full pigtail assembly.

Repair or replace a compatible gas pilot burner line with this 4mm aluminum pilot tubing kit. The 39.5 inch tube includes M8x1 compression fitting sets, olives, and sealing rings for propane and natural gas appliance pilot systems.

Convert a 3/8 in female flare propane connection to a 1/4 in quick-release setup for RVs, campers, trailers, grills, and outdoor cooking equipment. Solid brass fittings, a quick shut-off control valve, and sealing tape support flexible propane hose connection configurations.

Meter Star 3/4" gas quick connect fittings help simplify fuel line connections for natural gas and propane generator setups. The brass connector kit supports quick connect and disconnect use and includes fittings, protective covers, and sealing tape for installation.

Connect, extend, or repair air conditioning refrigerant lines without welding. This Meter Star copper pipe extension kit fits 1/4 in and 3/8 in diameter copper tubes and includes flare nuts and double-joint connectors for HVAC maintenance, retrofits, and custom installations.

Connect, extend, or repair 1/4 in and 1/2 in copper tubes in air conditioning systems with this Meter Star HVAC pipe connector. The copper fitting uses a double flare nut design to help form a secure, leak-resistant joint without welding.

Replace a damaged, rigid, or hard-to-align pilot supply line with this 24-inch flexible stainless steel pilot burner tubing kit. Made with 1/4-inch OD corrugated tubing and US standard 7/16-24 UNS fittings for matching gas fryer, water heater, pilot assembly, and gas control valve applications.

Internal diameter 10 mm, external 18 mm, thickness 3 mm

Inlet 1/2"BSP & Outlet 1/8"BSP thread

Thread: 7/16" Male Thread standard gas bottle thread.