47 products
The Compression fitting Olive Parts can be use for copper pipe, alumium pipe, oil pipe, flexible pipe used for gas, oil etc
The Compression fitting Olive Parts can be use for copper pipe, alumium pipe, oil pipe, flexible pipe used for gas, oil etc
The Compression fitting Olive Parts can be use for copper pipe, alumium pipe, oil pipe, flexible pipe used for gas, oil etc
Electric opening current < = 180 mA
High Temperature resistance 200 degree connection wire with 6.3 flat terminals 45cm
Brass Gas Regulator Valce
Metals Brass Couples Tube Fitting
One side with quick release connector and one side with Female 3/8 THREAD
This adapter is Used for any Thread from 1/2" NPT to convert to 3/8"NPT (5/8"-18UNEF) thread.
Material: Stainless Steel
One side with 3/8NPT straight thread and one side with M 3/8NPT compression thread
Metals Brass Compression Couples Tube Fitting, Coupling, 1/2" Female Pipe
CSA certified Y Spliter hose with 3/8" male flare and 3/8" female flare fittings
CSA certified hose 5/16" OD,Please note the size of the Y tube, if you need them to separate very large, then you need to extend the tube
/2" OD x 3/8" ID 24 '' stainless steel flexible pipe for fire pit CSA approved，Please pay attention to the length of the bellows and the size of the copper joints at both ends. The two copper joints we match are different. The joints at both ends of the bellows are 3/8 in size, which is consistent with the picture.
This Meter Star 2-piece propane pigtail hose connector set is designed for RV, trailer, and camper LP gas tank replacement or setup. Each 12 in connector features a 1/4 in inverted male flare connection, 350 PSIG working pressure, and 200,000 BTU per hour flow rating.
Meter Star 24 inch flexible gas connection hose is rated up to 350 PSI for propane and natural gas appliance connections. The 0.6 m hose includes 5/8-18 UNF flare female connectors on both ends for use as an extension or inlet hose where the fitting type matches the appliance.
Meter Star copper pipe extension connector is designed to join or extend 1/2 inch tubing in HVAC, air conditioning, and refrigeration line applications. The flare nut design supports a secure connection without welding and can be tightened with a standard wrench.
Connect, extend, or split copper tubing without welding for HVAC/R, AC refrigerant lines, refrigeration, plumbing, gas, fuel, and vacuum systems. This flare nut coupler kit fits 1/4 in and 3/8 in O.D. copper pipes and installs with a standard wrench.
Meter Star copper pipe extension connector helps extend or repair copper tubing in air conditioning and refrigeration systems without welding. The 3/4 in flare nut double joint fits 6mm to 19mm copper tubes and can be tightened with standard wrenches.
Join or extend 3/8 inch air conditioning copper tubing with a Meter Star flare nut double connector set. The wrench-tightened, no-welding design supports HVAC installation, repair, and tubing modification work using standard tools.
Connect and disconnect low-pressure natural gas or propane appliance lines quickly with this 1/2 inch brass gas quick connect kit. Designed for gas grills, patio heaters, RV hookups and fixed fuel source connections, it supports up to 100,000 BTU per hour.