Meter Star 30+5 MFD dual run capacitor combines 30μF and 5μF capacitance in one round CBB65B component for compatible compressor and fan motor applications.
Rated 370V/440V AC with Herm, Fan, and C terminals, it is designed for HVAC replacement use in air conditioners, condensers, heat pumps, and AC motor run systems.
Vérifiez le numéro d’article, les images, la taille et les informations du modèle avant de commander.
Convient à la réparation, à la maintenance ou au remplacement lorsque la pièce correspond à l’application correcte.
Contactez l’assistance avec des photos et des mesures si la compatibilité n’est pas claire.
Détails du produit
A weak or mismatched capacitor can prevent an air conditioner, condenser, heat pump, or AC motor system from operating correctly. This Meter Star CBB65B dual run capacitor provides 30μF and 5μF capacitance in one round unit, supporting compatible compressor motor and fan motor operation.
The capacitor is rated for 370V/440V AC at 50/60Hz with a capacitance tolerance of ±6%. It uses a metallized polypropylene film dielectric and metal-shell construction, with a stated 10,000 AFC safety rating and anti-explosion design. The operating temperature range is -40°C to +70°C (-104°F to 158°F), making it suitable for demanding HVAC equipment environments when specifications match.
Wiring is simplified with three clearly marked terminals: Herm or H for compressor, Fan or F for fan motor, and C for common. The round body measures 50mm in diameter and 100mm in height. It can replace compatible round or oval capacitors only when the microfarad rating, voltage, size, terminal layout, and equipment requirements are correct.
Use this 30+5 MFD run capacitor for compatible air conditioners, heat pump units, condenser units, AC motor run systems, and fan start applications. Always compare the existing capacitor label and wiring before installation.
Meter Star 30+5 MFD dual run capacitor combines 30μF and 5μF capacitance in one round CBB65B component for compatible compressor and fan motor applications. Rated 370V/440V AC with Herm, Fan, and C terminals, it is designed for HVAC replacement use in air conditioners, condensers, heat pumps, and AC motor run systems.
FAQ
Comment confirmer la compatibilité ?
Comparez le numéro d’article, les images du produit, la taille, l’option de variante et les informations du modèle affichés sur la page produit. Contactez-nous avant de commander si la pièce est utilisée avec du gaz, de la chaleur, de l’électricité ou des équipements liés à la sécurité.
Prenez-vous en charge les achats en gros ?
Les petites demandes de vente en gros sont les bienvenues. Envoyez le numéro d’article, la quantité, le pays de destination et toute exigence d’emballage ou de livraison, et nous vérifierons le stock afin de fournir un devis pratique.
Produits associés
Pièces de rechange et accessoires associés pouvant aider à répondre à des besoins de réparation, de maintenance ou d’approvisionnement.
Meter Star SRD-S-112DM is a compact 12VDC power relay for appliance repair, control circuits, automation projects, and electronic maintenance. Its 4-pin SPST normally open, non-latching design supports direct replacement when coil voltage, pin layout, and contact rating match the original relay.
Meter Star SRD-S-124DM is a 24VDC 4-pin SPST normally open relay for compatible appliance repair, electronic controls, and general control circuit replacement. CQC certified and rated for 15A current with switching voltage up to 277VAC, it is designed for use where voltage, pin layout, size, and load requirements match.
Meter Star CBB65B 50+5 MFD dual run capacitor combines 50μF and 5μF capacitance in one round unit for HVAC compressor and condenser fan motor applications. Rated for 370V/440V AC, it includes clearly labeled Herm, Fan, and C terminals for straightforward replacement when specifications match.
This Meter Star CBB65B dual run capacitor combines 70μF and 5μF capacitance in one round unit for matching HVAC condenser, air conditioner, and heat pump service applications. Rated 370V/440V AC with HERM, FAN, and Common terminals, it supports compressor and fan motor operation when electrical ratings match the original part.