Meter Star Propane Fire Pit/Fireplace Parts Propane Gas Control Valve System Regulator Valve with Hose and Key Kit,Max 90,000 BTU

Highlights - The assembly kit includes 5 Feet(1.5M) propane regulator with hose CSA certified - 1x 24inch Flexible Corrugated whister free propane hose - 1/2" Brass Control Key valve with with 3/8" male flare adapter of 2 - 3" Key for the brass valve chrome plated - Suitable for low pressure fire pit system less than 90000Btu This kit is suitable for BTU less than 90,000 with low pressure propane system only.
The Kit Do Not Include the Air Mixer nozzles.Purchase available in store(1/2" Propane Air Mixer Valve Nozzle Sprayer Valve Kit for Fire Pit, Fireplaces (Max Set, High Capacity 150K BTU) )
If the fire pit cannot lit, check your igniter and sparker and try to replace one.
Make sure the Gas cylinder valve is opened before start lighter.
Safety warming: Close the Gas cylinder valve if you do not to use the fire pit for safety.
1) Connect the 5 Feet regulator with hose on your 20-100lbs propane tank.
2) Connect the two male adapters with the brass key valve and keep tightly enough. ( you can use sealing glue or sealing tape)
3) Connect the 3/8” male adapter on the valve with the regulator hose and fix it.
4) Insert the brass key valve into your fire pit control panel and keep the valve chrome sleeve is exposed outside.
5) Connect the flexible corrugated hose with another side of 3/8” male flare adapter on brass valve.
6) The flexible corrugated hose should be connect your current burner inlet connect or air mixer nozzle. If your burner nozzle or adapter is 3/8” Male flare, you have to get an adapter first to fit the flexible corrugated hose.
7) Insert the key to the gas valve spindle and fix it.
8) Make sure all connection are tightly.
9) Start your lighter and turn the gas valve till you saw the flame.
10) You can use soap water to check if any gas leakage on connection points.