Meter Star KSD301 snap disc thermostat switches provide automatic circuit control at 45°C/113°F for appliance repair, HVAC equipment, heating devices, and DIY temperature control projects.
The normally open design closes the circuit when the sensed temperature reaches the set point.
Vérifiez le numéro d’article, les images, la taille et les informations du modèle avant de commander.
Convient à la réparation, à la maintenance ou au remplacement lorsque la pièce correspond à l’application correcte.
Contactez l’assistance avec des photos et des mesures si la compatibilité n’est pas claire.
Détails du produit
When an appliance, heating device, or control circuit needs automatic activation at a defined temperature, the Meter Star KSD301 thermostat switch offers a compact snap-action control solution. This normally open thermostat keeps the circuit open below 45°C/113°F and closes when the sensed temperature rises to or above that set point.
Rated 10A/250V, this snap disc temperature control switch is suitable for a wide range of repair, maintenance, OEM, and DIY applications. Common use scenarios include water heaters, coffee makers, dryers, HVAC equipment, water dispensers, space heaters, commercial food warmers, automotive seat heaters, warming devices, ventilation triggers, protective circuits, and industrial equipment.
The switch uses a metal sensing cover with a plastic housing and a flat leg movable ring KSD301 design for flexible mounting on suitable surfaces. For contact temperature sensing, apply thermal conductive compound to the metal surface during installation to support effective heat transfer.
This pack includes 5 identical 45°C/113°F normally open thermostats for appliance service, equipment maintenance, or multiple temperature control projects. Each unit has a compact, lightweight 5g design and 50 MΩ circuit resistance.
Meter Star KSD301 snap disc thermostat switches provide automatic circuit control at 45°C/113°F for appliance repair, HVAC equipment, heating devices, and DIY temperature control projects. The normally open design closes the circuit when the sensed temperature reaches the set point.
FAQ
Comment confirmer la compatibilité ?
Comparez le numéro d’article, les images du produit, la taille, l’option de variante et les informations du modèle affichés sur la page produit. Contactez-nous avant de commander si la pièce est utilisée avec du gaz, de la chaleur, de l’électricité ou des équipements liés à la sécurité.
Prenez-vous en charge les achats en gros ?
Les petites demandes de vente en gros sont les bienvenues. Envoyez le numéro d’article, la quantité, le pays de destination et toute exigence d’emballage ou de livraison, et nous vérifierons le stock afin de fournir un devis pratique.
Produits associés
Pièces de rechange et accessoires associés pouvant aider à répondre à des besoins de réparation, de maintenance ou d’approvisionnement.
Meter Star K-type thermocouple sensor provides temperature feedback for compatible furnaces, ovens, boilers, HVAC equipment, kilns and process heating systems. The M6 screw probe supports secure installation in matching ports, while the 6.5ft shielded cable allows flexible placement away from heat sources.
Meter Star K-type M6 screw thermocouple sensor provides stable fixed mounting for industrial equipment, ovens, engines, and temperature control systems. The 1 m WRNT shielding wire helps reduce electrical interference and withstand physical stress during high-temperature monitoring.
Meter Star K-type thermocouple sensor provides high-temperature measurement for compatible furnaces, ovens, boilers, HVAC systems and industrial equipment. The M6 screw-in probe supports secure installation, and the 16.4 ft shielded cable helps with routing in larger or hard-to-reach setups.
Meter Star KSD302 snap disc thermostats provide normally closed temperature control at 40°C/104°F for automatic circuit switching. Rated 16A/250V, this 5-pack supports appliance repair, heating and cooling equipment, and electrical temperature control projects.