Piezas para chimeneas, braseros y calefactores de patio

PIEZO WIRE 900MM, THERMOCOUPLE 900MM with M9X1 THREAD

Installation: Built-In / Surface Material: Stainless Steel

PILOT BURNER FOR CATERING COOKING APPLIANCE.

Triple-flame design ensures stable ignition and reliable operation in various conditions, providing superior flame retention compared to single-flame pilots.

This 2-piece Meter Star anti-tilt switch set is made for electric fan heaters and compatible electric appliances that use a tip-over power cutoff circuit. The 16A two-terminal micro dump switch is suitable for replacement, maintenance, or safety circuit integration when the original specifications match.

Build or upgrade a propane fire pit with a stainless steel drop-in pan, burner, electronic ignition, and gas control components in one kit. Designed for LP fire pit installations with a 36 x 12 inch cutout and connection to a standard 20 lb propane tank.

Build or upgrade an outdoor propane fire pit with a 12-inch 304 stainless steel burner ring, 27mm 37mbar clip-on regulator, and 1.5-meter gas hose. This kit supports up to 92,000 BTU and includes key connection accessories for DIY backyard and patio fire pit projects.

Replacement HHT 10002264 pilot assembly for compatible gas fireplaces, stoves, furnaces and other gas appliances. Supplied pre-assembled for propane use and includes a natural gas nozzle for conversion when required.

Complete propane fire pit kit for building or upgrading an outdoor gas fire pit or fireplace. Includes a 12 inch 304 stainless steel ring burner, gas control valve, regulator, hose, air mixer, push-button igniter and fittings for a more straightforward setup.

Replace a worn or faulty pilot system on compatible natural gas fireplaces, water heaters, boilers, forced air heaters and similar gas-fired equipment. This kit includes a pilot burner assembly, thermocouple and 24-inch tubing for service replacement by qualified personnel.

Restore ignition performance on compatible natural gas water heaters with this pilot and igniter assembly replacement kit. It replaces GG50T06AVH00, AS39845, and 22V40PF1 and includes related components for a more complete service repair.

Replace worn ignition, gas control and safety components in compatible propane fire pits and outdoor patio heaters. This repair kit includes a brass safety valve, pilot burner assembly, anti-tilt switch, connecting tubes, sealing rings and wiring for matching appliance setups.

Replacement pilot and thermopile assembly for compatible natural gas water heaters with ignition, heating, or intermittent pilot light issues. Designed to replace 9007876, 9007877, and compatible 300/301 series components for a complete pilot assembly repair.

Meter Star natural gas water heater pilot assembly helps restore stable pilot flame performance and consistent ignition in compatible systems. It replaces part numbers 100109295, 18324-190, and 9003542005 and features 190 degree over-temperature protection.

Meter Star pilot lid replacement kit helps repair compatible natural gas and propane pool or spa heater pilot assemblies. Designed for supported Raypak applications, it fits listed part numbers including 002003F, Q3451B1103, Q3451B1178, and Q3451B1186.

Meter Star 33183 single piece ignition electrode is a replacement part for compatible Clean Burn CB 500 series waste oil burners and Saturn CB 100/A2 burners. It replaces part 70370 and helps address mis-ignition, flameouts, signal leakage, and short circuit issues caused by worn electrodes.

Replace a worn or faulty pilot assembly in compatible natural gas water heaters with this Meter Star pilot burner assembly kit. It comes configured for NG use and includes an LP orifice for propane conversion, supporting compatible kits SP20824, SP20754, SP21058, SP21059, and SP20800.

Meter Star 69L17 is a natural gas ODS pilot burner assembly for compatible fireplace and stove repair. It replaces Lennox 69L17 and IHP pilot assemblies and is intended for supported models using a SIT Nova 820 Series natural gas valve.

Meter Star pilot burner assembly supports LP propane and natural gas configurations for compatible commercial fryer service. The kit includes a 36 inch thermopile tested to exceed 750mV output and is designed for systems using the Robertshaw 700-506 gas valve.

Replace a worn pilot burner or failed thermocouple in compatible gas furnaces, water heaters, and select boilers. This dual fuel NG/LP kit includes a pilot burner assembly, LPG and NG nozzles, and a universal 36-inch thermocouple with 11/32"-32 UNS thread.

Replacement thermopile generator pilot assembly for natural gas water heaters, designed to convert pilot flame heat into millivolt power for gas valve operation. Compatible with part numbers 233-47845-05 and CS8840A1-1041, with connecting wires and armored cable included for installation.

Replace a worn or failed intermittent pilot ignitor in compatible natural gas furnaces, unit heaters, HVAC equipment, and commercial cooking appliances. This assembly includes a target-style pilot burner, ceramic electrode, 0.52 mm natural gas orifice, 1/4 in OD brass compression inlet, and 32.5 in high-temperature ignition wire.

Replacement gas pilot burner assembly for compatible Robertshaw 1820-009, PG9A42JT and PG9 series pilot systems. Designed for Natural Gas or Liquid Propane applications, with a 1950-532 thermopile, 32 inch lead, orifices and mounting hardware for furnace, boiler and gas heater service.

Replace a worn or unreliable standing pilot assembly in compatible natural gas fireplaces. This Meter Star kit supports common pilot repair needs, including weak pilot flame, pilot outages, and ignition-related heating issues.