Meter Star Set of 2 Universal Ceramic Electrode Ignition Spark Plug Wire 0.3 Meter Electronic Device,Suitable for Push Button Piezo Igniter
Ref. article MSGAS-DHZX016Code produit 765390118932
30cm,Detailed parameters refer to the sample size in the photo，Note that the interface of the ignition needle is round
Highlights
M10*1 length: 51mm
Length of wire 1.18 inch with high tempereture 200°C resistance for Piezo Igniter Only
19.5mm,135degree at head 9.0mm,Set of 2
Détails du produit
Highlights
- Wire length: 30cm,Detailed parameters refer to the sample size in the photo，Note that the interface of the ignition needle is round
- Electrode : M10*1 length: 51mm;Length of wire 1.18 inch with high tempereture 200°C resistance for Piezo Igniter Only
- Pin straight length: 19.5mm,135degree at head 9.0mm,Set of 2
- If you can't use it normally after installation, please check whether the wire connection is normal; 2. Adjust the distance and position of the ignition needle and the burner, you can also contact us, thank you.
- Please note that the connection to the igniter is circular, suitable for pressing the igniter;The end of the terminal is in round with 2.3mm insert, If yours is square, try to stamp it and connect your current igniter to get a signal
1.If you can't use it normally after installation, please check whether the wire connection is normal; 2. Adjust the distance and position of the ignition needle and the burner, you can also contact us, thank you. Please note that the connection to the igniter is circular, suitable for pressing the igniter Length of wire 1.18 inch with high tempereture 200°C resistance for Piezo Igniter Only Universal spark with M10*1 thread includes two nuts to fix on your plate Suitable for repari your gas stove, grill, heater or other gas appliance for spark The end of the terminal is in round with 2.3mm insert, If yours is square, try to stamp it and connect your current igniter to get a signal Pack of 2 for a spare part
FAQ
Comment confirmer la compatibilité ?
Comparez le numéro d’article, les images du produit, la taille, l’option de variante et les informations du modèle affichés sur la page produit. Contactez-nous avant de commander si la pièce est utilisée avec du gaz, de la chaleur, de l’électricité ou des équipements liés à la sécurité.
Prenez-vous en charge les achats en gros ?
Les petites demandes de vente en gros sont les bienvenues. Envoyez le numéro d’article, la quantité, le pays de destination et toute exigence d’emballage ou de livraison, et nous vérifierons le stock afin de fournir un devis pratique.
Produits associés
Pièces de rechange et accessoires associés pouvant aider à répondre à des besoins de réparation, de maintenance ou d’approvisionnement.
【High Performance】This thermopile generator produces over 750mV of heating voltage with a nominal working temperature range of 700-750°C, ensuring efficient operation for gas fireplaces and heating appliances.
