750℃ temperature Resistance Millivolt Replacement Thermopile Generators Used On Gas FirePlace/Water Heater/Gas Fryer Cluster Thermocouple for 24" Fireplace - METER STAR

750℃ temperature Resistance Millivolt Replacement Thermopile Generators Used On Gas FirePlace/Water Heater/Gas Fryer Cluster Thermocouple for 24" Fireplace

Ref. article MSGAS-RDO007 Code produit 601593013585
  • a. Internal resistance (25°C), varies with specifications and length between 1,500 mΩ and 4,500 mΩ.Specifications: Length 24” Rating: 750 mv
  • Internal resistance (25°C), varies with specifications and length between 1,500 mΩ and 4,500 mΩ.Specifications: Length 24” Rating: 750 mv
  • Highlights
  • b. Normal working temperature 700-750°C.
  • spiral type and two-pole plug-in type.

Détails du produit

Highlights
- a. Internal resistance (25°C), varies with specifications and length between 1,500 mΩ and 4,500 mΩ.Specifications: Length 24” Rating: 750 mv
- b. Normal working temperature 700-750°C.
- c. Connecting type: spiral type and two-pole plug-in type.
- d. Lengths: 24 inches (609mm)from shop GAS COMPONENTS STORE
- Sufficient voltage is crucial: Ensure your pilot burner nozzle is fully open or properly drilled, replace old nozzles to provide enough flame heat to heat the thermopile. If the valve fails to open, clean the pilot nozzle—insufficient flame heat will prevent the thermopile from actuating the valve.

Specifications: Length 24” Rating: 750 mv The thermopile is used with 750 millivolt pilot systems. This system is generally found on gas fireplaces and gas logs that use wall switches or remote controls. This equipment is a kind of cobination type thermocouple, provides power for 750 millivolt self-generation control systems. a. Internal resistance (25°C), varies with specifications and length between 1,500 mΩ and 4,500 mΩ. b. Normal working temperature 700-750°C. c. Connecting type: spiral type and two-pole plug-in type. d. Lengths: 24 inches 750 Millivolt Replacement Thermopile Generators have long been used in self-powered heaters and hot water equipment. It has been proven in millions of appliances as the contractor's preferred thermopile and are found in many of today's self powered gas fireplaces. From the Manufacturer Millivolt Replacement Thermopile Generators have long been used in self-powered heaters and hot water equipment. The Honeywell CQ200A has been proven in millions of appliances as the contractor's preferred thermopile and are found in many of today's self powered gas fireplaces.

FAQ

Comment confirmer la compatibilité ?

Comparez le numéro d’article, les images du produit, la taille, l’option de variante et les informations du modèle affichés sur la page produit. Contactez-nous avant de commander si la pièce est utilisée avec du gaz, de la chaleur, de l’électricité ou des équipements liés à la sécurité.

Prenez-vous en charge les achats en gros ?

Les petites demandes de vente en gros sont les bienvenues. Envoyez le numéro d’article, la quantité, le pays de destination et toute exigence d’emballage ou de livraison, et nous vérifierons le stock afin de fournir un devis pratique.