Alle Produkte

The Meter Star KSD302 snap disc thermostat switch provides normally closed temperature control at a 125°C/257°F set point. Rated 16A/250V, this pack of 5 is suitable for compatible heating appliance repair, electric heating devices, and DIY temperature control projects.

Meter Star KSD301 snap disc thermostat provides automatic temperature switching at 100°C/212°F for compatible heating appliances and repair projects. The normally open 10A/250V temperature control switch closes the circuit when the set temperature is exceeded, making it suitable for maintenance, replacement, and DIY control applications.

Meter Star KSD302 snap disc thermostats provide normally closed temperature control for appliance repair, maintenance, and production use. Rated 16A at 250V with a 95°C/203°F trip point, this 5-pack fits common thermal cutoff applications in water heaters, coffee makers, food warmers, water dispensers, heating elements, and small industrial equipment.

Restore reliable spark ignition in compatible direct-vent, flue type gas water heaters with this Meter Star universal pulse igniter. The 3V DC controller produces a high-voltage spark over 12kV for single ignition control in gas-fired water heaters and similar appliances.

Meter Star DC 3V self-priming solenoid valve is a replacement part for gas water heaters that require low-voltage gas flow control. The 14mm eraser head design is intended for dedicated mounting holes in reverse solenoid valve configurations.

Meter Star 10-piece microwave door switch set for appliance repair, maintenance, and spare parts inventory. Designed as a three-pin normally open microswitch replacement for compatible W-15-102C, 202C, 302C, and W-105-202C.NO models.

Connect, extend, or split copper tubing without welding for HVAC/R, AC refrigerant lines, refrigeration, plumbing, gas, fuel, and vacuum systems. This flare nut coupler kit fits 1/4 in and 3/8 in O.D. copper pipes and installs with a standard wrench.

Meter Star brass propane cylinder caps help cover and protect 1 LB disposable propane bottle valve threads during storage, transport, and outdoor use. The screw-on design with internal threading and an O-ring seal fits common small propane tank applications for camping stoves, portable heaters, torches, lanterns, grills, RV gear, and workshop equipment.

This KSD301 normally closed snap disc thermostat opens the circuit at 100°C/212°F for automatic temperature cutoff in compatible heating appliances. Rated 10A/250V and supplied in a pack of 5 for appliance repair, DIY temperature control projects, and small equipment replacement.

Meter Star KSD302 snap disc thermostat switches provide 70°C/158°F temperature control for compatible electric heating devices and small appliances. The normally open design, 16A/250V rating, and curved-leg fixed ring style support replacement, repair, and project installation needs.

Meter Star KSD301 snap disc thermostats provide automatic temperature-controlled switching at 90°C/194°F for heating appliance repair, OEM projects, and DIY builds. The normally open switch closes the circuit when the sensed temperature rises above the set point, helping activate compatible heating controls.

Meter Star KSD302 snap disc thermostat switches help control temperature in compatible electric heating appliances and equipment. Each normally closed switch opens at 80°C/176°F and is rated 16A/250V for replacement, maintenance, or project installation work.

Meter Star KSD301 snap disc thermostats provide automatic 60°C/140°F temperature switching for appliance heating control and DIY electrical projects. The normally open circuit closes when the sensing surface reaches the set temperature, helping activate connected devices in a temperature control setup.

Meter Star KSD301 snap disc thermostat switches provide fixed 60°C/140°F temperature control for compatible electric heating appliances and repair projects. The normally closed design opens the circuit at the set temperature to support thermal control in suitable systems.

Meter Star KSD301 snap disc thermostat switches provide temperature-activated circuit control for heating appliance repair, maintenance, and project use. The normally open switch closes when the monitored temperature exceeds 95°C/203°F and is rated 10A/250V.

Meter Star KSD302 snap disc thermostat switches provide automatic temperature-controlled circuit switching at 65°C/149°F. The normally open design closes the circuit when temperature rises above the set point, supporting heating appliance repair, replacement, and project use.

Meter Star KSD302 snap disc thermostat switches provide temperature-triggered circuit control for appliances, heating equipment, and DIY repair projects. These normally open switches close at 60°C/140°F and are rated 16A/250V, supplied in a pack of 5 for service or replacement work.

10-piece Meter Star microwave oven door microswitch set for appliance repair and maintenance. Designed for compatible 3-pin NC/NO switch replacement with COM, NC, and NO terminal layout.

Meter Star copper pipe extension connector helps extend or repair copper tubing in air conditioning and refrigeration systems without welding. The 3/4 in flare nut double joint fits 6mm to 19mm copper tubes and can be tightened with standard wrenches.

Join or extend 3/8 inch air conditioning copper tubing with a Meter Star flare nut double connector set. The wrench-tightened, no-welding design supports HVAC installation, repair, and tubing modification work using standard tools.

Meter Star KSD301 normally open thermostat switches close the circuit when temperature rises above 85°C/185°F, supporting cut-in thermal control applications. Rated 250V 10A and supplied in a pack of 5, these compact snap disc switches are suitable for replacement, repair, and equipment integration projects.

Meter Star KSD301 snap disc thermostat switches provide normally closed temperature control for compatible heating appliances and equipment. Rated 250V/10A with a 120°C/248°F temperature point, this 5-pack supports repair, maintenance, and replacement needs.

Meter Star KSD301 snap disc thermostat provides normally closed temperature control at 160°C/320°F for compatible electric heating appliances. Rated 10A/250V and supplied as a pack of 5, it is suitable for repair, replacement, and maintenance spares.

Replace a worn or damaged propane regulator on compatible 17-inch and 22-inch tabletop griddles. This low-pressure 1lb griddle regulator provides 11 in W.C. outlet pressure, 25,000 BTU/hr gas flow, and a standard 1 in x 20 female disposable cylinder thread connection.