Meter Star Microwave Turntable Roller Ring, 8.7 in PPS Plastic Support Wheel Ring for 12.5 in Y-Type Glass Turntable Plates

Highlights
- Microwave turntable roller ring: 8.7 in outer diameter, 8.2 in inner diameter and 9.0 in maximum outside diameter with wheels for matching microwave glass tray setups
- Turntable support wheel ring: 0.59 in wheel height and 0.24 in wheel width help support the glass plate when the original roller ring has the same dimensions
- PPS plastic microwave ring: Made from PPS plastic with high temperature resistance, corrosion resistance, flame retardant properties, light weight and impact resistance
- Size check required: Please compare the inner diameter, outer diameter, maximum outside diameter and wheel height with your old ring before ordering
- Package contents: Includes 1 microwave turntable roller ring only; glass turntable plate and coupler shown in images are not included

A worn or mismatched microwave turntable roller ring can keep the glass plate from sitting correctly. This Meter Star microwave turntable roller ring is designed for setups that use a matching 8.7 in outer diameter support ring and a 12.5 in Y-type glass turntable plate. The ring is made from PPS plastic and has a listed outer diameter of 8.7 in, inner diameter of 8.2 in and maximum outside diameter with wheels of 9.0 in. The wheels measure 0.59 in high and 0.24 in wide. Single support ring weight is 1 oz. Before installation, remove the old roller ring and compare all key measurements, including inner diameter, outer diameter, maximum outside diameter with wheels and wheel height. Different dimensions may make the part unsuitable for your microwave. Place the roller ring on the microwave base, then set the matching glass turntable plate onto the ring and coupler. Package includes 1 roller ring only; glass plate and coupler are not included.