产品详情
Highlights
- Controller box contains all basic components to fire, except for regulator and hose from 201 S/s of the tank
- The size of the box is 7.88 inches (L) x 3.94 inches (H) x 7.09 inches (W). Not included the igniter and button height
- This is usually used for glass tube heating, but dimensions may differ for different brands, so compare the sizes is necessary before ordering
- Propane gas system with pilot burner and Aaa battery igniter with safety valve and dump switch safety kit
- The inlet adapter is for 10 mm inner diameter hose attached directly by clips, not suitable for hose with connections
- Equipped with 2 air intake connections, one is 1/4 left handed and complies with German standards and the other is 1/4 quick plug. The stove itself has a 3/8 inch air inlet interface, so it can be used in different environments.
- The pressure reducing valve and 1.5 meter hose in the kit are used with the left connector in the kit, and the other connector serves as a backup in different environments.
Portable propane gas glass tube heating control box.
Working instructions
After you receive the package, please follow the installation tips and instructions (English language not guaranteed).
1) Check the package to see if all parts are included.
2) Insert one AAA battery (#7) into the igniter and screw the switch. ( Need To Be Prepared In Advance, Products Do Not Contain Batteries)
3) Use 4 pieces M6 screws and nuts to attach the control box to your heating panel.
4) Place your regulator hose (ID approx. 10 mm) and attach it to the hose clips until it is firm enough.
5) Connect the regulator to your propane tanks.
6) The inlet pressure is 30 mbar.
Installation ready. !
How to work:
1) Turn the knob 90 degrees at the pilot position and push on.
2) Use another hand press the red button igniter until the pilot burner ignites
3) Release your hands, turn the valve to change the desired flame.
Tips:
When you turn the button to the pilot position, please hold it for seconds, press the igniter at the same time, do not release your hands before lighting the reading button.
Close the gas tank if you do not want to use it.
