产品详情
Highlights
- Propane Clip-On Regulator 27mm 37mbar,Pressure reducing valve is suitable for British standard
- Stylish Design: New cross-bar design for better gas distribution and great look for your fire pit
- Package Contents: Valve Kit(Knob & thermocouple); Matching bellows and 1.5 Meter hose and Propane Clip-On Regulator 27mm 37mbar Regulator;1PC Thread Seal Tapes For Gas; 2pc 3/8-1/2 Threaded hole adapter
- 3/8" female flare thread control flame failure safety valve 1pc with knob,maximum BTU level: 50000 working pressure 65MBAR
- 600mm(24") Universal M8 thermocouple 1pc
Low-pressure maintenance control system for barbecue, fire pit, fireplace and heater (maximum BTU level: 50000 working pressure 65MBAR).
Thermocouple nut: M8 * 1, full length 24 ", suitable for gas series: Ng / lpg / propane / butane.
Internal resistance: 5-50 + -3MΩ material: EP-NIGR EN-CUNI
Thermocouple temperature: -200 - 850 degrees Celsius, used in gas fireplaces, fire pits, grills, stovers, catering cooking utensils, terrace heaters, etc.
No-load potential:> = 30 mV (as required), the head is heated during use (if stopping work, please re-adjust the tip position).
This thermocouple is universal, but determine the screw size and thermocouple length before purchase.
1/2" OD x 3/8" ID 24 inch fire pit stainless steel hose with 1/2" nuts on both sides, (including 1/2" external thread NPT x 1/2" internal thread NPT connector)
CSA approved, please pay attention to the length of the bellows and the size of the copper joints at both ends. The two copper joints we matched are different. The size of the joints at both ends of the bellows is 3/8, which is consistent with the picture.
